The sensorless control schemes based on machine saliency detection by signal injection commonly adopt a position observer to estimate the motor position. The position observer usually employs proportional-integral- derivative- (PID-) type controllers and low-pass-filters (LPFs) whose parameters need to be properly tuned to achieve satisfactory, or at least stable, performances. Generally, the position observers are tuned with trial and error procedures that require commissioning time and control design experience. This paper deals with the observer modelling and tuning. In particular, the observer model is used for a model-based position control tuning and the effectiveness of the proposed procedure is confirmed by the good agreement of theoretical and experimental results. The experimental test have been realized using both a linear tubular permanent magnet motor (LTPM) and a rotating internal permanent magnet motor (IPM) to demonstrate that the motor control performances can be predicted only if the observer behaviour is considered

Model based design of a sensorless control scheme for permanent magnet motors using signal injection / Cupertino, Francesco; Giangrande, P.; Salvatore, L.; Pellegrino, G.. - (2010), pp. 3139-3146. (Intervento presentato al convegno 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010 tenutosi a Atlanta, GA nel September 12-16, 2010) [10.1109/ECCE.2010.5618469].

Model based design of a sensorless control scheme for permanent magnet motors using signal injection

CUPERTINO, Francesco;
2010-01-01

Abstract

The sensorless control schemes based on machine saliency detection by signal injection commonly adopt a position observer to estimate the motor position. The position observer usually employs proportional-integral- derivative- (PID-) type controllers and low-pass-filters (LPFs) whose parameters need to be properly tuned to achieve satisfactory, or at least stable, performances. Generally, the position observers are tuned with trial and error procedures that require commissioning time and control design experience. This paper deals with the observer modelling and tuning. In particular, the observer model is used for a model-based position control tuning and the effectiveness of the proposed procedure is confirmed by the good agreement of theoretical and experimental results. The experimental test have been realized using both a linear tubular permanent magnet motor (LTPM) and a rotating internal permanent magnet motor (IPM) to demonstrate that the motor control performances can be predicted only if the observer behaviour is considered
2010
2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010
978-1-4244-5286-6
Model based design of a sensorless control scheme for permanent magnet motors using signal injection / Cupertino, Francesco; Giangrande, P.; Salvatore, L.; Pellegrino, G.. - (2010), pp. 3139-3146. (Intervento presentato al convegno 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010 tenutosi a Atlanta, GA nel September 12-16, 2010) [10.1109/ECCE.2010.5618469].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11589/16630
Citazioni
  • Scopus 21
  • ???jsp.display-item.citation.isi??? 18
social impact