A contact problem is considered in which an elastic half-plane is pressed against a rigid fractally rough surface, whose profile is defined by a Weierstrass series. It is shown that no applied mean pressure is sufficiently large to ensure full contact and indeed there are not even any contact areas of finite dimension-the contact area consists of a set of fractal character for all values of the geometric and loading parameters. A solution for the partial contact of a sinusoidal surface is used to develop a relation between the contact pressure distribution at scale n-1 and that at scale n. Recursive numerical integration of this relation yields the contact area as a function of scale. An analytical solution to the same problem appropriate at large n is constructed following a technique due to Archard. This is found to give a very good approximation to the numerical results even at small n, except for cases where the dimensionless applied load is large. The contact area is found to decrease continuously with n, tending to a power-law behaviour at large n which corresponds to a limiting fractal dimension of (2 - D), where D is the fractal dimension of the surface profile. However, it is not a 'simple' fractal, in the sense that it deviates from the power-law form at low n, at which there is also a dependence on the applied load. Contact segment lengths become smaller at small scales, but an appropriately normalized size distribution tends to a limiting function at large n.

Linear elastic contact of the Weierstrass profile / Ciavarella, Michele; Demelio, Giuseppe Pompeo; Barber, Jr; Jang, Yh. - In: PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON. SERIES A. - ISSN 1364-5021. - STAMPA. - 456:1994(2000), pp. 387-405. [10.1098/rspa.2000.0522]

Linear elastic contact of the Weierstrass profile

CIAVARELLA, Michele;DEMELIO, Giuseppe Pompeo;
2000-01-01

Abstract

A contact problem is considered in which an elastic half-plane is pressed against a rigid fractally rough surface, whose profile is defined by a Weierstrass series. It is shown that no applied mean pressure is sufficiently large to ensure full contact and indeed there are not even any contact areas of finite dimension-the contact area consists of a set of fractal character for all values of the geometric and loading parameters. A solution for the partial contact of a sinusoidal surface is used to develop a relation between the contact pressure distribution at scale n-1 and that at scale n. Recursive numerical integration of this relation yields the contact area as a function of scale. An analytical solution to the same problem appropriate at large n is constructed following a technique due to Archard. This is found to give a very good approximation to the numerical results even at small n, except for cases where the dimensionless applied load is large. The contact area is found to decrease continuously with n, tending to a power-law behaviour at large n which corresponds to a limiting fractal dimension of (2 - D), where D is the fractal dimension of the surface profile. However, it is not a 'simple' fractal, in the sense that it deviates from the power-law form at low n, at which there is also a dependence on the applied load. Contact segment lengths become smaller at small scales, but an appropriately normalized size distribution tends to a limiting function at large n.
2000
Linear elastic contact of the Weierstrass profile / Ciavarella, Michele; Demelio, Giuseppe Pompeo; Barber, Jr; Jang, Yh. - In: PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON. SERIES A. - ISSN 1364-5021. - STAMPA. - 456:1994(2000), pp. 387-405. [10.1098/rspa.2000.0522]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11589/169
Citazioni
  • Scopus 217
  • ???jsp.display-item.citation.isi??? 195
social impact