In this study, CO2 laser – MIG hybrid welding process was investigated for butt welding of Ti-6Al-4V titanium alloy sheets, 3.0 mm thickness. The effect of hybrid welding parameters (laser power, arc pulse repetition rate, arc length, arc current, wire feed rate, relative positions of laser and MIG, welding speed) was investigated. The gap bridging ability as also been reported. In the present research microstructure and mechanical properties were studied using optical microscopy, morphological analysis of the cross-sections and mechanical tests (hardness). The report deals with the results of energetic and morphological analysis

CO2 Laser-MIG Hybrid Welding of Titanium Alloy / Brandizzi, Marco; Anna Satriano, Annunziata; Tricarico, Luigi. - STAMPA. - 264-265:(2011), pp. 1270-1280. (Intervento presentato al convegno International Conference on Advances in Materials and Processing Technologies, AMPT 2009 tenutosi a Kuala Lumpur, Malaysia nel October 26-29, 2009.) [10.4028/www.scientific.net/AMR.264-265.1270].

CO2 Laser-MIG Hybrid Welding of Titanium Alloy

Luigi Tricarico
2011-01-01

Abstract

In this study, CO2 laser – MIG hybrid welding process was investigated for butt welding of Ti-6Al-4V titanium alloy sheets, 3.0 mm thickness. The effect of hybrid welding parameters (laser power, arc pulse repetition rate, arc length, arc current, wire feed rate, relative positions of laser and MIG, welding speed) was investigated. The gap bridging ability as also been reported. In the present research microstructure and mechanical properties were studied using optical microscopy, morphological analysis of the cross-sections and mechanical tests (hardness). The report deals with the results of energetic and morphological analysis
2011
International Conference on Advances in Materials and Processing Technologies, AMPT 2009
978-3-03785-053-4
CO2 Laser-MIG Hybrid Welding of Titanium Alloy / Brandizzi, Marco; Anna Satriano, Annunziata; Tricarico, Luigi. - STAMPA. - 264-265:(2011), pp. 1270-1280. (Intervento presentato al convegno International Conference on Advances in Materials and Processing Technologies, AMPT 2009 tenutosi a Kuala Lumpur, Malaysia nel October 26-29, 2009.) [10.4028/www.scientific.net/AMR.264-265.1270].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11589/7825
Citazioni
  • Scopus 3
  • ???jsp.display-item.citation.isi??? 2
social impact