The operation of different energy sources in a MicroGrid (MG) has to be monitored and controlled by means of the Energy Management Systems (EMS) both in the grid-connected and islanded modes. In the first case, the MG can be seen as a single controllable unit by the grid operator whereas in the islanded mode the successful balance between internal load and planned generation is also required. In this paper, the architecture of an experimental MG is described. Modbus TCP/IP is used as the communication protocol in the MG to receive data and send commands to different components within the system, and monitoring by means of cabled signals is performed. Furthermore, in order to efficiently cater for electric and thermal demand, a central EMS is aimed to evaluate different procedures for the day-ahead scheduling of a MG. In particular, operational planning is proposed and applied to a selected configuration of a testbed facility at Politecnico di Bari. Grid-connected as well as stand-alone configurations are tested.

An architecture for the monitoring of microgrid operation / Aluisio, Benedetto; Cagnano, Alessia; DE TUGLIE, Enrico Elio; Dicorato, Maria; Forte, Giuseppe; Trovato, Michele Antonio. - (2016). (Intervento presentato al convegno 2016 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems, EESMS 2016 tenutosi a Bari, Italy nel June 13-14, 2016) [10.1109/EESMS.2016.7504809].

An architecture for the monitoring of microgrid operation

Aluisio, Benedetto;CAGNANO, Alessia;DE TUGLIE, Enrico Elio;DICORATO, Maria;FORTE, Giuseppe;TROVATO, Michele Antonio
2016-01-01

Abstract

The operation of different energy sources in a MicroGrid (MG) has to be monitored and controlled by means of the Energy Management Systems (EMS) both in the grid-connected and islanded modes. In the first case, the MG can be seen as a single controllable unit by the grid operator whereas in the islanded mode the successful balance between internal load and planned generation is also required. In this paper, the architecture of an experimental MG is described. Modbus TCP/IP is used as the communication protocol in the MG to receive data and send commands to different components within the system, and monitoring by means of cabled signals is performed. Furthermore, in order to efficiently cater for electric and thermal demand, a central EMS is aimed to evaluate different procedures for the day-ahead scheduling of a MG. In particular, operational planning is proposed and applied to a selected configuration of a testbed facility at Politecnico di Bari. Grid-connected as well as stand-alone configurations are tested.
2016
2016 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems, EESMS 2016
978-1-5090-2369-1
978-1-5090-2370-7
An architecture for the monitoring of microgrid operation / Aluisio, Benedetto; Cagnano, Alessia; DE TUGLIE, Enrico Elio; Dicorato, Maria; Forte, Giuseppe; Trovato, Michele Antonio. - (2016). (Intervento presentato al convegno 2016 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems, EESMS 2016 tenutosi a Bari, Italy nel June 13-14, 2016) [10.1109/EESMS.2016.7504809].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11589/98431
Citazioni
  • Scopus 6
  • ???jsp.display-item.citation.isi??? 0
social impact