The aim of this search is to evaluate the WE (Welding Efficiency) of each beads versus the different positions of the laser beam optical focus (positive or negative or zero values) respect to the work-piece surface and also versus different laser beam incidence angles (80° and 70°) by using two laser power levels (2 and 2.5 KW) and two welding speeds (3 and 6m / min). The WE values have been reported on two DA.LU. method plots and the relate evaluations regarding the same ones as well as the recorded best parameters have been evidenced.
A quantitative evaluation of the L.B.W. efficiency on AISI 304 bead on plates welded under different focusing and tilted laser beam conditions / Daurelio, G.; Ludovico, A. D.; Lugarà, M. P.; De Filippis, L. A. C.; Spera, A. M.; Rocco, S.. - STAMPA. - 5777:PART II(2005), pp. 895-902. (Intervento presentato al convegno 15th International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, GCL/HPL 2004 tenutosi a Prague, Czech Republic nel 30 August- 3 September 2004) [10.1117/12.611207].
A quantitative evaluation of the L.B.W. efficiency on AISI 304 bead on plates welded under different focusing and tilted laser beam conditions
Ludovico, A. D.;De Filippis, L. A. C.;
2005
Abstract
The aim of this search is to evaluate the WE (Welding Efficiency) of each beads versus the different positions of the laser beam optical focus (positive or negative or zero values) respect to the work-piece surface and also versus different laser beam incidence angles (80° and 70°) by using two laser power levels (2 and 2.5 KW) and two welding speeds (3 and 6m / min). The WE values have been reported on two DA.LU. method plots and the relate evaluations regarding the same ones as well as the recorded best parameters have been evidenced.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
