In this paper the design of a miniaturized fringe-projector is presented. The projector is intended to be inserted in a triangulation scheme in order to allow implementation of projection moire technique. The system is specifically designed to be part of a device for contouring complex shapes like those of dental elements. The proposed fringe projection system is based upon the projection of the pattern obtained as a result of the interference between the two points-like sources constituted by the wavefronts emerging by two fiber tips put next together. Results obtained on calibrated specimens confirms the feasibility of the proposed approach. In fact, shape errors observed for the calibrated specimens are below the level of precision required in tooth reconstruction (100 mu m).

Design of a fiber optics fringe projector for 3D reconstruction of dental elements / Casavola, C; Pappalettera, G; Pappalettere, C. - ELETTRONICO. - (2014). (Intervento presentato al convegno Third Mediterranean Photonics Conference, MePhoCo 2014 tenutosi a Trani, Italy nel May 7-9, 2014) [10.1109/MePhoCo.2014.6866487].

Design of a fiber optics fringe projector for 3D reconstruction of dental elements

Casavola C;Pappalettera G;Pappalettere C
2014-01-01

Abstract

In this paper the design of a miniaturized fringe-projector is presented. The projector is intended to be inserted in a triangulation scheme in order to allow implementation of projection moire technique. The system is specifically designed to be part of a device for contouring complex shapes like those of dental elements. The proposed fringe projection system is based upon the projection of the pattern obtained as a result of the interference between the two points-like sources constituted by the wavefronts emerging by two fiber tips put next together. Results obtained on calibrated specimens confirms the feasibility of the proposed approach. In fact, shape errors observed for the calibrated specimens are below the level of precision required in tooth reconstruction (100 mu m).
2014
Third Mediterranean Photonics Conference, MePhoCo 2014
978-147994818-5
Design of a fiber optics fringe projector for 3D reconstruction of dental elements / Casavola, C; Pappalettera, G; Pappalettere, C. - ELETTRONICO. - (2014). (Intervento presentato al convegno Third Mediterranean Photonics Conference, MePhoCo 2014 tenutosi a Trani, Italy nel May 7-9, 2014) [10.1109/MePhoCo.2014.6866487].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11589/16526
Citazioni
  • Scopus 5
  • ???jsp.display-item.citation.isi??? 1
social impact