Among the non-heat treatable aluminium alloys the Aluminium-Magnesium alloys, which are known as 5xxx series, have good strengths that are achieved by magnesium in solid solution. They still have very good weldability and deformability. Therefore, following the trend to substitute automobile parts with light alloys, the AlMg alloys have received raising interest from automotive industry. In this paper 5005 and 5052 Al-Mg alloys welding was investigated. The CO2 laser and MIG arc sources were used simultaneously. The bead geometry was studied versus the welding parameters for 3 mm thick plates. Moreover bead-onplate welds were obtained for 10 mm thickness, which represent a good benchmark for further investigation. In particular the focal position, the scanning speed, and the power were the adjustable parameters of the laser. The MIG gun-to-laser beam distance and the guntilting angle also varied. The former variation in distance permitted to compare coupled and combined working conditions.

Process parameters effects On Al-Mg alloys MIG-Laser CO2 welding / Casalino, G.; Lobifaro, F.. - CD-ROM. - (2005), pp. 1062-1068. (Intervento presentato al convegno 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 tenutosi a Miami, FL nel October 31 - November 3, 2005).

Process parameters effects On Al-Mg alloys MIG-Laser CO2 welding

Casalino, G.;
2005-01-01

Abstract

Among the non-heat treatable aluminium alloys the Aluminium-Magnesium alloys, which are known as 5xxx series, have good strengths that are achieved by magnesium in solid solution. They still have very good weldability and deformability. Therefore, following the trend to substitute automobile parts with light alloys, the AlMg alloys have received raising interest from automotive industry. In this paper 5005 and 5052 Al-Mg alloys welding was investigated. The CO2 laser and MIG arc sources were used simultaneously. The bead geometry was studied versus the welding parameters for 3 mm thick plates. Moreover bead-onplate welds were obtained for 10 mm thickness, which represent a good benchmark for further investigation. In particular the focal position, the scanning speed, and the power were the adjustable parameters of the laser. The MIG gun-to-laser beam distance and the guntilting angle also varied. The former variation in distance permitted to compare coupled and combined working conditions.
2005
24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005
0-912035-82-X
Process parameters effects On Al-Mg alloys MIG-Laser CO2 welding / Casalino, G.; Lobifaro, F.. - CD-ROM. - (2005), pp. 1062-1068. (Intervento presentato al convegno 24th International Congress on Applications of Lasers and Electro-Optics, ICALEO 2005 tenutosi a Miami, FL nel October 31 - November 3, 2005).
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11589/19196
Citazioni
  • Scopus 8
  • ???jsp.display-item.citation.isi??? ND
social impact