The effect of different shoulder geometries on the mechanical and microstructural properties of a friction stir welded joints have been studied in the present paper. The process was used on 6082 T6 aluminium alloy in the thickness of 1.5 mm. The three studied tools differed from shoulders with scroll and fillet, cavity and fillet, and only fillet. The effect of the three shoulder geometries has been analysed by visual inspection, macrograph, HV microhardness, bending test and transverse and longitudinal room temperature tensile test. The investigation results showed that, for thin sheets, the best joint has been welded by a shoulder with fillet and cavity.
Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy / Scialpi, A.; DE FILIPPIS, Luigi Alberto Ciro; Cavaliere, P.. - In: MATERIALS & DESIGN. - ISSN 0264-1275. - 28:4(2007), pp. 1124-1129. [10.1016/j.matdes.2006.01.031]
Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy
DE FILIPPIS, Luigi Alberto Ciro;
2007-01-01
Abstract
The effect of different shoulder geometries on the mechanical and microstructural properties of a friction stir welded joints have been studied in the present paper. The process was used on 6082 T6 aluminium alloy in the thickness of 1.5 mm. The three studied tools differed from shoulders with scroll and fillet, cavity and fillet, and only fillet. The effect of the three shoulder geometries has been analysed by visual inspection, macrograph, HV microhardness, bending test and transverse and longitudinal room temperature tensile test. The investigation results showed that, for thin sheets, the best joint has been welded by a shoulder with fillet and cavity.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
