The main objective of the presented work is to evaluate the thermal behavior of Poly-lactic acid (PLA) parts made with a Fused Deposition Modelling (FDM) process. By using a robust framework for the testing sequence of PLA parts, with the aim of establishing a standard testing cycle for the optimization of the part performance and quality. The research involves study the materials before and after 3D printing. Two biodegradable PLA polymers are investigated, characterized by different colors (one black and the other transparent). The study starts with the examination of each polymeric material and measurements of its main thermal properties.
Characterization of PLA parts made with AM process / Spina, Roberto; Cavalcante, Bruno; Lavecchia, Fulvio. - ELETTRONICO. - 1960:(2018). (Intervento presentato al convegno 21st International ESAFORM Conference on Material Forming, ESAFORM 2018 tenutosi a Palermo, Italy nel April 23-25, 2018) [10.1063/1.5034987].
Characterization of PLA parts made with AM process
Spina, Roberto
;Cavalcante, Bruno;Lavecchia, Fulvio
2018-01-01
Abstract
The main objective of the presented work is to evaluate the thermal behavior of Poly-lactic acid (PLA) parts made with a Fused Deposition Modelling (FDM) process. By using a robust framework for the testing sequence of PLA parts, with the aim of establishing a standard testing cycle for the optimization of the part performance and quality. The research involves study the materials before and after 3D printing. Two biodegradable PLA polymers are investigated, characterized by different colors (one black and the other transparent). The study starts with the examination of each polymeric material and measurements of its main thermal properties.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
