Experimental and numerical studies have demonstrated that thermally activated building systems (TABS) may lead to significant energy savings. However, TABS are generally incorporated into the building during the construction phase, limiting their adoption to new buildings. To encourage the application of TABS during building refurbishments, the authors have developed a radiant ceiling panel (RCP) with macroencapsulated phase change materials (PCM). This study aims to provide the criteria to design, size, and control the newly proposed RCP-PCM system. A simplified method to size and design the RCP-PCM system for cooling applications is developed from a set of parametric dynamic simulations. At first, the thermal storage properties of the macro-encapsulated PCM were determined using the standard ASTM C1784-20. The obtained properties were then used in a whole-building simulation model validated using measurements in a small test chamber that replicates the conditions of an actual test room. The PCM panel thickness of 0.015 m and a supply water temperature of 15 ℃ showed the best results in terms of thermal comfort and effective thermal energy storage capacity. The implementation of the simplified method in a case study showed that the RCP-PCM system maintained room conditions within the specified thermal comfort range (−0.5 < PMV < 0.5) for more than 90% of the occupied periods in all of the evaluated cooling-dominated climates. Moreover, yearly-round, the PMV values never reached values higher than 0.8 or lower than −0.6, confirming the effectiveness of the proposed method for designing a RCP-PCM system. The results show that energy savings of 22% could be obtained in a very hot and humid climate using an RCP-PCM system instead of a conventional all-air system. In conclusions, this paper offers a new system to promote energy flexibility and Demand-Side Management (DSM) strategies to modulate the energy demands in retrofitted buildings.
Design and control of radiant ceiling panels incorporating phase change materials for cooling applications / Gallardo, A.; Berardi, U.. - In: APPLIED ENERGY. - ISSN 0306-2619. - 304:(2021), p. 117736.117736. [10.1016/j.apenergy.2021.117736]
Design and control of radiant ceiling panels incorporating phase change materials for cooling applications
Berardi U.
2021-01-01
Abstract
Experimental and numerical studies have demonstrated that thermally activated building systems (TABS) may lead to significant energy savings. However, TABS are generally incorporated into the building during the construction phase, limiting their adoption to new buildings. To encourage the application of TABS during building refurbishments, the authors have developed a radiant ceiling panel (RCP) with macroencapsulated phase change materials (PCM). This study aims to provide the criteria to design, size, and control the newly proposed RCP-PCM system. A simplified method to size and design the RCP-PCM system for cooling applications is developed from a set of parametric dynamic simulations. At first, the thermal storage properties of the macro-encapsulated PCM were determined using the standard ASTM C1784-20. The obtained properties were then used in a whole-building simulation model validated using measurements in a small test chamber that replicates the conditions of an actual test room. The PCM panel thickness of 0.015 m and a supply water temperature of 15 ℃ showed the best results in terms of thermal comfort and effective thermal energy storage capacity. The implementation of the simplified method in a case study showed that the RCP-PCM system maintained room conditions within the specified thermal comfort range (−0.5 < PMV < 0.5) for more than 90% of the occupied periods in all of the evaluated cooling-dominated climates. Moreover, yearly-round, the PMV values never reached values higher than 0.8 or lower than −0.6, confirming the effectiveness of the proposed method for designing a RCP-PCM system. The results show that energy savings of 22% could be obtained in a very hot and humid climate using an RCP-PCM system instead of a conventional all-air system. In conclusions, this paper offers a new system to promote energy flexibility and Demand-Side Management (DSM) strategies to modulate the energy demands in retrofitted buildings.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
