The complexity of modelling in karst environments necessitates substantial adjustments to existing hydrogeological models, with particular emphasis on accurately representing surface and deep processes. This study proposes an advanced methodology for modelling regional coastal karst aquifers using an integrated SWAT-MODFLOW approach. The focus is on the regional coastal karst aquifer of Salento (Italy), which is characterised by significant heterogeneity, anisotropy and data scarcity, such as limited discharge measurements and water levels over time. The integrated SWAT - MODFLOW approach allows an accurate description of both surface and subsurface hydrological processes specific to karst environments and demonstrates the adaptability of the models to karst-specific features such as sinkholes, dolines and fault permeability. The study successfully addresses the challenges posed by the distinctive characteristics of karst systems through the integration of SWAT-MODFLOW. Additionally, incorporating of satellite data enhances the precision and dependability of the model by augmenting the traditional datasets. The entire simulation period, which included both the calibration and validation phases, extended from 2008 to 2018. The calibration phase occurred between 2008 and 2011, followed by the validation phase between 2015 and 2018. The temporal choices were exclusively based on the availability of meteorological and hydrogeological data. During calibration, satellite data, previous study results, and groundwater level measurements were used to optimize the SWAT and MODFLOW models. Validation subsequently confirmed model accuracy by comparing simulated groundwater levels with observed data, demonstrating a satisfactory root mean square error (RMSE) of 0.22 m. Modelling results indicate that evapotranspiration is the predominant hydrological process, and excessive withdrawals could lead to a water deficit. Simulated piezometric maps provide crucial information on recharge areas and hydraulic compartments delineated by faults. The study not only advances the understanding of the hydrogeology of the specific case study but also provides a valuable reference for future modelling of karst aquifers. Additionally, it highlights the crucial need for ongoing enhancement in the management and monitoring of coastal karst aquifers.
Hydrogeological modelling of a coastal karst aquifer using an integrated SWAT-MODFLOW approach / Fiorese, Gaetano Daniele; Balacco, Gabriella; Bruno, Giovanni; Nikolaidis, Nikolaos. - In: ENVIRONMENTAL MODELLING & SOFTWARE. - ISSN 1364-8152. - ELETTRONICO. - 183:(2025). [10.1016/j.envsoft.2024.106249]
Hydrogeological modelling of a coastal karst aquifer using an integrated SWAT-MODFLOW approach
Fiorese, Gaetano Daniele;Balacco, Gabriella
;Bruno, Giovanni;
2025-01-01
Abstract
The complexity of modelling in karst environments necessitates substantial adjustments to existing hydrogeological models, with particular emphasis on accurately representing surface and deep processes. This study proposes an advanced methodology for modelling regional coastal karst aquifers using an integrated SWAT-MODFLOW approach. The focus is on the regional coastal karst aquifer of Salento (Italy), which is characterised by significant heterogeneity, anisotropy and data scarcity, such as limited discharge measurements and water levels over time. The integrated SWAT - MODFLOW approach allows an accurate description of both surface and subsurface hydrological processes specific to karst environments and demonstrates the adaptability of the models to karst-specific features such as sinkholes, dolines and fault permeability. The study successfully addresses the challenges posed by the distinctive characteristics of karst systems through the integration of SWAT-MODFLOW. Additionally, incorporating of satellite data enhances the precision and dependability of the model by augmenting the traditional datasets. The entire simulation period, which included both the calibration and validation phases, extended from 2008 to 2018. The calibration phase occurred between 2008 and 2011, followed by the validation phase between 2015 and 2018. The temporal choices were exclusively based on the availability of meteorological and hydrogeological data. During calibration, satellite data, previous study results, and groundwater level measurements were used to optimize the SWAT and MODFLOW models. Validation subsequently confirmed model accuracy by comparing simulated groundwater levels with observed data, demonstrating a satisfactory root mean square error (RMSE) of 0.22 m. Modelling results indicate that evapotranspiration is the predominant hydrological process, and excessive withdrawals could lead to a water deficit. Simulated piezometric maps provide crucial information on recharge areas and hydraulic compartments delineated by faults. The study not only advances the understanding of the hydrogeology of the specific case study but also provides a valuable reference for future modelling of karst aquifers. Additionally, it highlights the crucial need for ongoing enhancement in the management and monitoring of coastal karst aquifers.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.