Herein, we present, for the first time, the features of a full solid-state electrochromic (EC) device fabricated on a single substrate, made of glass as well as flexible plastic, adopting a low-cost, eco-friendly, and facile fabrication process. By combining a solution processing of Nafion electrolyte film and RF sputtering deposition at room temperature (RT) on Nafion, we obtained monolithic systems with a simplified architecture (substrate/ITO/WO3/Nafion/ITO) in which a suitable Nafion film (8 µm thick) tightly shares its interfaces with the WO3 layer and the highly transparent and conductive RF-sputtered ITO film. Compared to conventional sandwich-type EC devices using semi-solid or liquid electrolytes, the resulting devices exhibited a strong enhancement in terms of interface properties, robustness, cyclic stability, and long-term durability (at least 1000 chronoamperometric cycles). Moreover, electro-optical characterizations highlighted high transmittance modulation (49% at 650 nm), astonishing results in terms of coloration efficiency (139 cm2/C), and low energy absorption (80 mW s/cm2).
Room temperature processing for solid-state electrochromic devices on single substrate: From glass to flexible plastic / Cossari, Pierluigi; Cannavale, Alessandro; Gambino, Salvatore; Gigli, Giuseppe. - In: SOLAR ENERGY MATERIALS AND SOLAR CELLS. - ISSN 0927-0248. - 155:(2016), pp. 411-420. [10.1016/j.solmat.2016.06.029]
Room temperature processing for solid-state electrochromic devices on single substrate: From glass to flexible plastic
CANNAVALE, Alessandro;
2016-01-01
Abstract
Herein, we present, for the first time, the features of a full solid-state electrochromic (EC) device fabricated on a single substrate, made of glass as well as flexible plastic, adopting a low-cost, eco-friendly, and facile fabrication process. By combining a solution processing of Nafion electrolyte film and RF sputtering deposition at room temperature (RT) on Nafion, we obtained monolithic systems with a simplified architecture (substrate/ITO/WO3/Nafion/ITO) in which a suitable Nafion film (8 µm thick) tightly shares its interfaces with the WO3 layer and the highly transparent and conductive RF-sputtered ITO film. Compared to conventional sandwich-type EC devices using semi-solid or liquid electrolytes, the resulting devices exhibited a strong enhancement in terms of interface properties, robustness, cyclic stability, and long-term durability (at least 1000 chronoamperometric cycles). Moreover, electro-optical characterizations highlighted high transmittance modulation (49% at 650 nm), astonishing results in terms of coloration efficiency (139 cm2/C), and low energy absorption (80 mW s/cm2).I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.